How To Make A Responsive Yoyo Unresponsive: A Simple Guide

You might be wondering why your once responsive yoyo is suddenly acting sluggish. While it’s possible you need to work on your throwing technique, a more common culprit is a bearing that needs some TLC.

Think of it like oiling the engine of your car. Over time, the lubrication in a bearing breaks down, just like oil in a car. The result? Friction increases, slowing down your yoyo’s spin. That’s why a little bit of Suber Lube can make a world of difference.

Suber Lube is a popular choice for yoyo bearings because it’s a high-quality lubricant that won’t dry out or gum up like some other options. Applying a small drop to your bearing can revive its responsiveness, bringing back the smooth, effortless spin you crave.

Here’s a simple trick to identify if your bearing needs a little love:

1. Spin the yoyo: Give your yoyo a good spin.
2. Listen closely: Does it sound rough or gritty? That’s a sign the bearing needs some lubrication.

Now, let’s talk a bit more about yoyo bearings. They are the heart of your yoyo, responsible for all that smooth spinning and responsiveness. The bearing is made of tiny metal balls that roll around within a metal raceway. When the bearing is properly lubricated, those balls spin freely with minimal friction.

But when the lubrication wears down, those balls start to rub against the raceway, creating friction and slowing down the spin.

That’s where Suber Lube comes in. It acts as a barrier between the metal parts, reducing friction and allowing the bearing to spin freely.

Remember, it’s a simple fix! A few drops of Suber Lube can breathe new life into your yoyo and get you back to enjoying smooth, responsive spins in no time.

Here’s how to get your responsive yo-yo to sleep:

Hold the yo-yo in a flat palm. Gently twist your palm downward and let the yo-yo fall. The yo-yo should start spinning once it reaches the end of the string. It should not reel back up the string.

Let’s break down why this works. The key to getting a responsive yo-yo to sleep is to create a smooth, controlled descent. By twisting your palm downward, you’re giving the yo-yo a slight initial spin. This spin, combined with the downward motion, will help the yo-yo to “catch” the string and start spinning at the bottom of the string.

Think of it like this: imagine you’re trying to get a ball to roll smoothly down a ramp. If you give it a little push at the top, it’s more likely to roll down without stopping or bouncing. Similarly, by giving the yo-yo a little initial spin, you’re helping it to maintain its momentum and keep spinning as it reaches the bottom of the string.

If the yo-yo starts reeling back up the string, it’s likely that you didn’t give it enough initial spin. You might also need to adjust the tension of your yo-yo string. A tighter string will make it more difficult for the yo-yo to sleep, while a looser string will make it easier.

Practice this technique a few times and you’ll be getting your yo-yo to sleep in no time!

It’s important to avoid getting lube on the response pads of your yoyo, as this can cause them to stretch and stick out. If this happens, you’ll likely need to replace them.

Unresponsive ball bearing yoyos can sleep for a long time, typically between 10 seconds and 2 minutes or more. This long sleep time is what makes them unresponsive. It’s all about the bearing and response system.

Unresponsive yoyos are designed to spin for a long time without returning to your hand. This is because they have a specialized bearing system that reduces friction and a response system that slows down the spin gradually. The bearing allows the yoyo to spin freely for extended periods. The response system is usually made of silicone pads that are designed to create friction and slow the yoyo down.

The sleep time of an unresponsive yoyo depends on several factors, including the quality of the bearing, the type of response system, and the weight of the yoyo. A heavier yoyo will generally have a longer sleep time than a lighter yoyo.

Here’s how it works: When you throw an unresponsive yoyo, it spins freely due to the low friction in the bearing. As the yoyo spins, the silicone pads in the response system start to create friction, gradually slowing down the spin. When the yoyo reaches a certain speed, the friction becomes strong enough to cause the yoyo to return to your hand. This process can take anywhere from a few seconds to a couple of minutes, depending on the factors mentioned above.

So, how long can an unresponsive yoyo spin? It really depends on the yoyo and how it’s set up. You can find some yoyos that can spin for several minutes, while others may only spin for a few seconds. The key is to choose a yoyo that has a long enough sleep time for the tricks you want to perform.

Let’s figure out why your yo-yo isn’t spinning! A tightly twisted string can actually stop your yo-yo from spinning smoothly. Imagine the string as a little track for your yo-yo – if it’s too twisted, it gets bumpy and your yo-yo can’t spin properly.

But if the string isn’t tight enough, your yo-yo might not come back up to your hand. Think of it like this: a loose string means less energy for the yo-yo to climb back up.

Finding the sweet spot for your string tension is like finding the perfect balance! You want just the right amount of twist so your yo-yo spins freely but also has enough energy to return to your hand. It’s like learning to ride a bike – takes a little practice!

Transaxles, those little spinning parts inside the yo-yo, also play a big role in how your yo-yo spins. A transaxle is essentially a small axle that helps the yo-yo spin more smoothly. If your yo-yo is new, the transaxle might need a bit of time to “break in” and spin freely.

Here’s a little trick: try giving your yo-yo a gentle spin with your fingers. If it spins smoothly and feels like it has a bit of weight to it, you know the transaxle is doing its job.

Think of the transaxle like a tiny engine inside your yo-yo, helping it spin smoothly and efficiently. It’s a bit like a car engine – the better it works, the smoother your ride!

Responsive yoyos are a great choice for learning tricks! They’re designed to return to your hand with a gentle tug, making them perfect for beginners. This means you can focus on mastering fundamental moves like Sleeper and Around the World, building your control and coordination along the way.

Responsive yoyos are all about the “return to hand” mechanism, often featuring a “starburst” or “ball bearing” in the center of the yoyo. When you pull the string, this mechanism engages, allowing the yoyo to smoothly return to your hand. This makes it ideal for learning basic tricks since you don’t need to worry about catching the yoyo.

Here’s a breakdown of why responsive yoyos are excellent for trick learning:

Easy to Learn: Because the yoyo returns to your hand, you can focus on the movement and timing of the trick without worrying about catching it.
Control: Responsive yoyos give you a sense of control, allowing you to practice tricks at your own pace. This is crucial for developing the muscle memory and coordination needed for more advanced tricks.
Foundation Building: Mastering basic tricks with a responsive yoyo is a great foundation for moving on to more complex tricks with unresponsive yoyos. You’ll have the skills and understanding to tackle those challenges more easily.

If you’re just starting out, responsive yoyos are a fantastic way to embark on your yoyo journey. Start with the basics and enjoy the fun and satisfaction of pulling off your first tricks!

To switch your yoyo from responsive to unresponsive, you’ll need to replace the bearing. This process is pretty straightforward, but it’s important to be careful.

If your yoyo’s bearing is particularly tight, you can gently use a set of pliers to help remove it. Then, you’ll want to install a larger, concave bearing. These bearings are designed specifically for unresponsive play, and they’ll give you the ability to perform longer tricks and combos without the yoyo coming back to your hand.

Once you’ve placed the concave bearing into the yoyo, you can screw it back together. The concave bearing will make your yoyo unresponsive, meaning it won’t automatically return to your hand after a throw. This is a crucial change for advanced yoyo tricks.

Concave bearings are specifically designed to prevent the yoyo from returning to your hand. They achieve this by increasing the distance between the yoyo’s axle and the yoyo’s wall. This space, known as the gap, creates air resistance, allowing the yoyo to spin for longer.

Unresponsive yoyos need to be “slept” (meaning you need to manually wind the string back up to your hand) after every trick. This is a technique that most yoyoers learn over time as they develop their skill.

Keep in mind that switching your yoyo to unresponsive is a permanent change. If you want to go back to a responsive setup, you’ll need to swap the bearing again. You can also experiment with different sized concave bearings to find the level of unresponsiveness that’s right for you.

You might be wondering why your yo-yo won’t wind up. This is a common problem, especially with bearing yo-yos. Let me explain how to fix it!

Bearing yo-yos are designed to spin freely. This means they have small ball bearings inside that allow them to spin for a long time. However, this free-spinning action can make it tricky to wind up the string.

Here’s a simple trick: Use your thumb to hold the string against the inside edge of the yo-yo while you wind it. This will keep the string from slipping and spinning freely. After a few winds (about 3-5), you can release your thumb and finish winding the string.

Let’s dive a little deeper into why this works. Bearing yo-yos are engineered for smooth, extended spinning. This is achieved by using bearings which are small metal balls that allow the yo-yo to spin freely. When you attempt to wind the string without securing it, the spinning action of the bearings will make it difficult to wind it up properly. The spinning motion of the yo-yo will overcome the force you are applying to wind the string, making it seem as if the yo-yo won’t wind.

Think of it like trying to wind a string around a spinning top. It’s almost impossible to do! By holding the string in place, you’re essentially pausing the yo-yo’s spinning, allowing you to wind the string effectively. This simple technique will ensure that your yo-yo winds up correctly and you can start performing tricks in no time!

Let’s talk about responsive and unresponsive yoyos! Both have their pros and cons, and the best choice really depends on your goals.

If you’re looking to master yo-yo tricks, a responsive yoyo is the way to go. It’s designed to come back to your hand after a throw, making it perfect for learning and practicing. With a responsive yoyo, you can focus on perfecting your technique without worrying about the yoyo escaping.

On the other hand, unresponsive yoyos are great for performing advanced tricks and long string play. They stay in the air for longer, allowing you to pull off complex maneuvers. However, unresponsive yoyos require more practice and skill to master because they don’t come back to your hand automatically.

So, how should you start? It’s really up to you! If you’re new to yo-yoing, a responsive yoyo is an excellent starting point. It’ll help you build a strong foundation and learn the basics. You can always switch to an unresponsive yoyo later if you’d like to push your skills further!

Here’s the thing about unresponsive yoyos: they require a special tool called a “throw-off” to bring the yoyo back to your hand. This might sound a little intimidating, but it’s actually quite simple once you get the hang of it. The throw-off is used to release the string from the bearing, causing the yoyo to return to your hand.

Think of it like this: a responsive yoyo is like learning to ride a bicycle with training wheels, while an unresponsive yoyo is like learning to ride a bicycle without them. You might take a few more tumbles with an unresponsive yoyo, but the feeling of finally conquering those advanced tricks is totally worth it!

Ultimately, the choice is yours. Do you want to focus on mastering basic tricks and techniques, or are you ready to dive into the world of advanced yoyoing?

Let’s figure out why your yoyo isn’t behaving the way you want it to. One important aspect is the bearing, which connects the string to the axle.

If your yoyo doesn’t have a bearing, it’s going to be tough to make it unresponsive. Unresponsive yoyos are designed to sleep for a long time, which means they spin for a while before returning to your hand.

If your yoyo *does* have a bearing, make sure it isn’t lubricated. It shouldn’t feel oily to the touch.

Smaller bearings (like size C or smaller) tend to make yoyos more responsive. A responsive yoyo comes back to your hand quickly after a throw.

A note about modding: Modifying your yoyo can be fun, but it’s important to proceed with caution. Experimenting with your yoyo can be a great way to learn more about how it works, but it’s always a good idea to start with a less expensive yoyo in case you make a mistake.

Here’s a little more about bearings:

Types of Bearings: Bearings come in different sizes. The most common sizes for yoyos are size C, size B, and size A, with size C being the largest and size A being the smallest.

Bearing Quality: The quality of the bearing can affect how smooth and responsive your yoyo is. Higher quality bearings are usually made with better materials and have tighter tolerances, which means they spin more smoothly and last longer.

Bearing Lube: Lubricating your yoyo bearing can help it spin more smoothly and reduce friction. However, too much lube can make your yoyo unresponsive. If you’re unsure about how much lube to use, it’s best to start with a small amount and add more as needed.

Cleaning Your Bearings: Over time, your yoyo bearing will accumulate dirt and debris. This can cause the bearing to spin less smoothly. You can clean your bearings with a small amount of alcohol and a cotton swab. Be sure to dry the bearing completely before re-installing it.

Understanding your yoyo’s bearings is a great way to improve your throws and get the most out of your yoyo. Have fun experimenting!

You’re right, most yoyos sold today can be easily modified to be responsive or unresponsive. This means you don’t need to worry too much about choosing a specific type when you’re first starting out.

Here’s why:

Responsive yoyos are great for beginners because they come back to your hand easily. They’re perfect for learning basic tricks.
Unresponsive yoyos stay sleeping longer, allowing for more complex tricks and longer string manipulations.

To switch a yoyo from responsive to unresponsive (or vice versa), you simply need to adjust the bearing inside the yoyo. The bearing is a small, metal part that helps the yoyo spin smoothly.

To make a yoyo unresponsive, you can:

Add a bearing spacer: This creates a small gap between the bearing and the yoyo, slowing down the spin and making the yoyo sleep longer.
Use a wider bearing: Wider bearings create more friction, which also slows down the spin.

To make a yoyo responsive, you can:

Remove the spacer: This brings the bearing closer to the yoyo, allowing it to spin faster and return to your hand more easily.
Use a narrower bearing: Narrower bearings have less friction, so the yoyo spins faster.

You can find bearing spacers and different types of bearings at most yoyo shops or online. It’s a simple and relatively inexpensive way to customize your yoyo and make it perfect for your preferred style of play.

Let’s talk about what makes a yo-yo responsive. The response system inside the yo-yo halves is key. This system can use silicone rings or starburst patterns on the plastic itself.

Starburst is a pattern that creates friction. It helps the yo-yo sleep longer, but it also makes it less responsive. If you want your yo-yo to be more responsive, you’ll need to get rid of the starburst. You can do this using sandpaper or other tools.

So how does this affect how responsive your yo-yo is? Think of it like this: when you throw your yo-yo down, it spins and the string wraps around the axle. This creates friction, slowing down the spinning. When the yo-yo slows down enough, the string catches on the response system and the yo-yo comes back up to your hand. If you have starburst, it’s like adding more friction, making the yo-yo spin slower and take longer to come back up.

Here’s a breakdown of how the response system works:

Silicone rings: These rings provide friction and help the yo-yo sleep. The more friction, the longer the sleep time. To get rid of this friction and make the yo-yo more responsive, you can simply remove the rings.
Starburst: This is a textured pattern on the plastic inside the yo-yo halves. It acts similarly to silicone rings, creating friction and extending the sleep time. However, this friction can be reduced by smoothing out the starburst with sandpaper.

The key is finding the right balance between responsiveness and sleep time. If you want your yo-yo to be really responsive, remove the silicone rings or smooth out the starburst. If you want a yo-yo that sleeps longer, you’ll need more friction. It’s all about finding what works best for you!

How to change MAGICYOYO V3 from responsive to

Hello, this is a tutorial video for you to learn how to transform the V3 from slim bearing with 8mm axle (make it responsive)to 8 ball concave bearing with 10mm axle (make it unresponsive)…. YouTube

How To Turn An Unresponsive YOYO To Responsive – YouTube

How To Turn An Unresponsive YOYO To Responsive – YouTube. Nerdstan. 28.8K subscribers. 137. 23K views 2 years ago #YOYO. Play My Game “GameBreak” on YouTube

how do you make a responsive yoyo unresponsive : r/Throwers

There are somenfactors that make a yoyo more or less responsive. The response system on the inside of the halves. Either silicone rings or the plastic itself is riffled (“starburst”). Reddit

How to Bind a Yoyo – Basic and Intermediate Binds for

How to Bind a Yoyo – Basic and Intermediate Binds for Unresponsive Yoyos – YouTube. YoTricks. 439K subscribers. Subscribed. 13K. 1.1M views 4 years ago Yoyo Bind Series Tutorials. Learn how to… YouTube

Responsive vs. Unresponsive Yoyo (What’s the

I am Evan Nagao, the world yoyo champion, and I will show you the difference between responsive and unresponsive play. With unresponsive play, the you need to learn how to bind. I won’t… YouTube

Binding: how to bind an unresponsive yoyo

Binding is the trick you use when you are playing with an unresponsive yoyo to get the yoyo to wind back up. In this video I am going to teach you a few different ways to bind just to get you started. YoYoTricks.com

Is it possible to turn an unresponsive yoyo into a responsive one?

-If you can bind (or are willing to learn), there’s really no real reason to make your cypher responsive. -Responsive will teach you to work with less spin time and to reddit.com

What to do if your yoyo is too responsive – YoYoExpert Forums

If your yoyo is responsive, and it was meant to be unresponsive, do the list. Just play with it for a while. Playing for around 7 hours will break in most, but 10 YoYoExpert Forums

Unresponsive vs Responsive Capabilities – Yo-Yo Tricks

Unresponsive yoyos are not able to do looping tricks, since they will not return to your hand. They are mainly for string tricks, but can be used for 3a and 5a too. YoYoExpert Forums